1 5

Rapid Cure MVB - Pigmented Primer & Moisture Vapor Barrier

Rapid Cure MVB - Pigmented Primer & Moisture Vapor Barrier

Rapid Cure MVB is a two-component, pigmented moisture vapor barrier, primer and base coat for concrete floors.


Description

Rapid Cure MVB is an all-in-one, two-component pigmented primer and moisture vapor barrier for concrete. It penetrates and seals the substrate to reduce water vapor transmission, helping lower the risk of coating failure, blistering and delamination. Because it works as a primer, a moisture barrier and a color base coat in one product, it can streamline a flooring system from slab prep to finish.

Rapid Cure MVB is roughly 90% solids with low VOC and low odor, and it’s easy to apply and recoat. It cures to a high-gloss finish with strong chemical resistance. It’s available in several popular colors, accepts broadcast flakes for decorative floors, and pairs with PolyGuard 85 Clear for added protection and gloss. It suits garage floors, restaurants, service areas, countertops, wood and laminates.

Each kit contains Part A and Part B, mixed at a 2:1 ratio by volume, and is sold in 3-gallon sizes (2 gallons of Part A and 1 gallon of Part B). For professional use only. Always read the label and test in an inconspicuous area before applying. Available through Surfacelogix distributors.


    Product Details

    Technical Data

    Product Features

    • 90% Solids & Low VOC
    • Commercial Grade
    • Low Odor
    • Easy to Apply
    • High Gloss Finish
    • Excellent Chemical Resistance

    Applications

    • Garage floors
    • Restaurants
    • Service areas
    • Countertops
    • Wood
    • Laminates

    Instructions

    Preparation: Surfaces must be clean and free of any contaminants before application (oils, grease, or solvents should not be present). New concrete should cure at least 28 days before applying. Rapid Cure MVB’s performance is directly related to how thoroughly the surface is prepared. When applying directly on old concrete or stripped cement, all cracks should be eliminated. Sand/ grind thoroughly with 60-grit sandpaper or diamonds (diamond grind or shotblast to a CSP 1-3 surface profile) and clean off existing coating to provide proper surface profile before applying.

    Mixing: Start by mixing Parts A and B of Rapid Cure MVB. The correct ratio of 2:1, as provided (2 gallons of Part A to 1 gallon of Part B). Pour Parts A and B into a clean, dry container and gently mix with a drill for 2-3 minutes, avoiding creating air bubbles. Do not mix in a plastic container, as combining Parts A and B can result in a high exothermic reaction, leading to a temperature increase. Always test the product in an obscure area to ensure desired results. Do not apply over clear acrylics, clear water-based systems, pavers, or very porous substrates. 

    Applications: Apply mixed product at a spread rate of 100-150 sq. ft. per gal. using a squeegee and back roll with a non-shedding 3/8” nap roller to achieve a 12-15 wet film thickness.

    READ LABEL THOROUGHLY BEFORE APPLYING PRODUCT

    CONTACT US WITH ANY QUESTIONS.

    Data Sheets

    Technical Data Sheets

    Safety Data Sheets

     


    View full details