Natural Stone & Clay Bricks
Sealing natural stones and clay pavers not only protects them but also enhances their beauty and longevity, making them easier to maintain over time. Surfacelogix recommends using these DIY-friendly products to clean and seal natural stones:

Surface Prepation
Cobble Clean - Degreaser & Cleaner
Eliminates grease and oil contaminants that may hinder sealers from properly adhering to the surface. These contaminants might not be visible but are likely present on the surface being sealed. Coverage: 250-300 square feet per gallon.
Cobble Prep - Efflorescence Remover
Eliminates efflorescence commonly found on hardscape materials. If trapped beneath a sealer, efflorescence can create an unattractive, chalky appearance. Coverage: 50-500 square feet per gallon.

Sealers
For Natural Stone:
Cobble Impregnator (NS) is a clear, breathable, water-based protectant designed for use on natural stone, concrete, and other properly prepared masonry surfaces. Coverage: 200-300 square feet per gallon.
For Clay Bricks:
Cobble Impregnator (CP) is a clear, breathable, water-based protectant designed for use on clay bricks and surfaces where moisture does not readily dissipate. Coverage: 200-300 square feet per gallon.
Concrete Surfaces & Pavers
Sealing your concrete surfaces and pavers is essential for preserving their beauty and extending the life of your patio, driveway, or pool deck. Sealing concrete surfaces protects them from weather, stains, and everyday wear. Surfacelogix recommends these DIY-friendly products for cleaning and sealing concrete pavers:

Surface Prepation
Cobble Clean is an eco-friendly degreaser and surface cleaner designed for heavy-duty degreasing and dirt removal. Use it to remove oil, grease stains, chewing gum, and tire marks. Coverage: 250-300 square feet per gallon.
Cobble Prep is an eco-friendly cleaner for unsealed paving stones and concrete. It effectively removes stains, efflorescence (white lime residue), and surface stains caused by fertilizer, vegetation, and mortar, while also preparing surfaces for sealing.. Coverage: 50-500 square feet per gallon.

Sealers
For Concrete Pavers:
Cobble Coat H₂O Wet is a ready-to-use, “wet look” clear sealer specially designed for concrete pavers. It seals, protects, stabilizes, and enhances color—all in one quick and easy application. Coverage: 200-350 square feet per gallon.
For Concrete Surfaces:
Cobble Coat H₂O is a ready-to-use, film-forming sealer that protects concrete surfaces while allowing the surface to breathe. It provides a natural look and a semi-gloss finish. Coverage: 200-350 square feet per gallon.
Decorative Concrete
Sealing concrete surfaces with a pigmented sealer is an easy way to improve and restore the look of concrete surfaces. Surfacelogix recommends using these DIY-friendly products for decorative concrete:

Surface Preparation
Cobble Clean is an co-friendly degreaser and surface cleaner designed for heavy-duty degreasing and dirt removal. Use it to remove oil, grease stains, chewing gum, and tire marks. Coverage: 250-300 square feet per gallon.

Color Sealer
Colorcrete is a water-based color sealer for pool decks, patios, walkways, and driveways. This ready-to-use sealer is easy to apply and resists water and abrasion. Choose from 30 available colors. An optional top coat can be applied for additional protection and durability. Coverage: 250-300 square feet per gallon.

Top Coat / Clear Sealers
Clear or Top Coat Sealer:
Cobble Coat H₂O is a ready-to-use, “wet look” clear sealer designed for concrete pavers, natural stone, and concrete surfaces. It seals, protects, stabilizes, and enhances color—perfect for top coats over decorative concrete such as Colorcrete. Coverage: 200-350 square feet per gallon.
Clear or Top Coat Sealer with Anti-Slip:
Cobble Grip is a semi-gloss, anti-slip, water-based sealer designed for concrete surfaces, travertine, and natural stone. It can also be used as an anti-slip top coat for Colorcrete. Coverage: 350-500 sq. ft. per gallon