Cobble™ Strip - Industrial Strength Paint & Coatings Stripper

Cobble™ Strip lifts paint, sealers, and stains off concrete, natural stone, and pavers — low odor, eco-friendly, and commercial grade.

$382.00 USD

Sale Contact us for availability.

Shipping calculated at checkout.

Size 1 Gallon 5 Gallon

Quantity

Description

Strip failed sealers, old paint, and stubborn stains off concrete, pavers, and natural stone. Cobble Strip is an eco-friendly, low odor paint stripper. Cobble Strip goes on thick, penetrates deep, and softens coatings from the inside out — solvent- or water-based. Thirty minutes of dwell time and a pressure washer is usually all it takes. It's a commercial-grade formula that's still low-odor and biodegradable, so crews can run it on occupied job sites without the complaints.

Why Professionals Use Cobble Strip

Cuts strip time on multi-coat jobs. One liberal coat, worked into grooves and control joints, is enough to lift most sealers, paints, and stains — including layered or aged coatings that other strippers bounce off of.

Works on solvent- and water-based coatings alike. No guessing which stripper matches which sealer. Cobble Strip handles both, so it's one product to stock instead of two.

Low odor, biodegradable, commercial grade. Formulated to perform like an industrial stripper without the harsh fumes — safer for crews and easier to use near occupied buildings, pools, and landscaping.

No dilution, no mixing ratios to get wrong. Apply straight from the container. Less prep, less to clean up.

Product Details

Product Assistant

Technical Data

Product Features:

Commercial grade
Removes paints, stains, and sealers
Easy application and easy to rinse
Fast-acting formula
Low odor
Biodegradable

Coverage: 50 to 100 sq. ft. per gallon

Packaging: Available in 1-gallon cans (9 lb.) and 5-gallon pails (45 lb.). 125-1G: 4 per case, 180 per pallet. 125-5G: 36 per pallet.

Storage & Shelf Life: Product must be kept in its original, unopened and tightly sealed container. Store in a dry and well ventilated place with controlled temperature (40°F to 90°F). Keep sheltered from weather and direct sunlight. In proper storage conditions, the product’s shelf life is 12 months following production (see date on packaging). Store product in original container and close lid tightly after each use.

Instructions

Before You Begin: Before applying Cobble Strip, ensure all areas not being stripped are fully protected. Ensure all surfaces are dry prior to stripping. Water will deactivate the stripping action.

Mixing: Stir the product thoroughly before use.

Application: Cobble Strip should be applied directly from the container using a roller or sprayer. Apply a liberal amount of Cobble Strip to the surface requiring stripping. Work Cobble Strip into grooved areas. Allow Cobble Strip to stand for a minimum of 30 minutes. Weather conditions, type of coating being removed, and coating thickness will determine how long Cobble Strip must dwell for stripping action to develop.

After softening of paint film begins and film starts to wrinkle or blister, begin to pressure wash the coating off of the substrate. Water will deactivate the stripper. When removing the stripper with water, ensure that rinse water does not contact areas that have not yet been stripped.

Maintenance: Cobble Strip will remove most sealers, paints, and concrete stains, both solvent and water based. It is designed to be used on horizontal concrete and natural stones substrates and will not harm the environment or substrate.

Notice

Do NOT allow Cobble Strip to dry prior to removing it. When stripping large areas, it is recommended to divide into smaller sections and strip one section at a time rather than attempting to strip the entire project.
Do NOT dilute Cobble Strip.

CONTACT US WITH ANY QUESTIONS.

Data Sheets

View full details

Cobble™ Strip - Industrial Strength Paint & Coatings Stripper