Surfacelogix
Gator Skin - Solvent-Based Natural Look Waterproofing Sealer
Gator Skin - Solvent-Based Natural Look Waterproofing Sealer
Please Note: Only 1-gallon containers of this product can be shipped. Local pickup of 5-gallon containers is available at our office in Pompano Beach, FL. Please call (954) 971-9111 to place an order.
Gator Skin is an inorganic silicone penetrating protectant. Its inorganic silicone chemistry means that it is not broken down by natural elements. By deeply penetrating into the substrate, it offers years of internal protection. Its breathable nature means it will not trap moisture and will prevent water penetration into the substrate protecting it from weather.
Product Features
- Easy to apply
- Breathable
- Keeps natural appearance
- Inorganic
- Protects the substrate by deeply penetrating
Applications
- Use Gator Skin on any porous material that needs protections for the elements such as:
- Natural Stone
- Bricks
- Wood
- Concrete
Directions
Before You Begin: Surfaces must be clean, dry and free of any contaminants before sealing. Gator Skin Repellent performance is directly related to how thoroughly the surfaced is prepared. All grease, oil and potential contaminates must be removed. Do not apply when the temperature of the air or the surface to be coated is below 50°F. Testing on your surface is always recommended to ensure desired results.
Surface Preparation: Concrete should cure a minimum of 28 days before sealing. Read label instructions carefully. Cobble Clean, Cobble Prep and Cobble Oxhide may be used for specific cleaning situations.
Mixing Instructions: Stir product
Application: Apply with a lambs wool or microfiber cloth, working the material into the surface.
Airless Sprayer: Spray by overlapping each pass. Always apply in an even film deposit and maintain a working wet line. Remove any excess material after 3-5 minutes.
On Bare Surface: Apply to the surface and allow to penetrate for 3-5 minutes, remove any excess. Do not allow any excess or pooling to dry on the surface.
Over Previously Sealed: Film forming sealers will need to be stripped prior to application. Gator Skin Repel-lent may be applied over non film forming sealers provided the prior application is sufficiently worn away.
Resources
Share
Important Notices
Important Notices
READ LABEL THOROUGHLY BEFORE USING PRODUCT.
CONTACT US WITH ANY QUESTIONS.
Subscribe to our emails
Subscribe to our mailing list for insider news, product launches, and more.